Blow lamp and scrape upper wooden hull back to bare timber and sand down. Caulking and fill seams and joints in order to keep water tight. Apply 1 coat wood primer, 1 coat undercoat and 2 coats topcoat enamel. Fully paint from top of mast to keel.
Fit new zinc anodes. Polish propeller. Alluminium and steelwork fabrications and repairs.
Service clean and renew sea chest valves and pipe work in engine room. Shotblast, hot metal zinc spray and 3 coat with 2 pack paint to reconditioned net drum, hydraulics engineers to refit.